Skip to Content
Mantra Fingerprint Scanner RD Service Test Page

Test Mantra MFS100 / MFS110 biometric device connectivity, serial number extraction, and capture diagnostics

MFS100 (L0) & MFS110 (L1) Port Scan 11100-11105 UIDAI Certified RD Service AEPS, CSC & PM-Kisan

Mantra Fingerprint Scanner RD Service Test Page

Diagnostic testing utility for Mantra MFS100 and MFS110 optical fingerprint scanners. Scan and connect to local Registered Device Services across ports 11100 to 11105, inspect device firmware and DP ID, extract hardware serial numbers, and test live fingerprint capture with quality score verification.

Mantra MFS100 and MFS110 Optical Fingerprint Scanner Online RD Service Test
✓ Hardware Verified Ports 11100-11105
⚠️ Mantra Driver Prerequisites
  • Mantra RD Service Running: Ensure the Mantra RD Service Windows service is running in services.msc before testing.
  • Multiport Support: Mantra dynamically selects an available port between 11100 and 11105. Our initialization will scan all 6 ports automatically.
  • OTG / USB Connection: Connect directly to a motherboard USB port. If on Android, ensure OTG permission is granted in system settings.
Mantra Operations & Diagnostics
127.0.0.1:11100-11105
Mantra RD Service Console (127.0.0.1:11100-11105)

Welcome to Mantra RD Service Diagnostic Console.

[Step 1] Connect your Mantra MFS100/MFS110 and click "Run Initialization & Port Scan" above.

Mantra Pre-Flight Checklist
  • ✓
    Mantra RD Service Running: Confirm Mantra AADHAAR RD Service is running in Windows Services (services.msc).
  • ✓
    Port Scanning (11100-11105): Ensure local security firewalls permit loopback communication on ports 11100 to 11105.
  • ✓
    MFS100 / MFS110 Driver: Verify Mantra Client Driver (v9.2.0.0 or higher) is installed.
  • ✓
    Sensor Surface Clean: Wipe the optical prism with a dry microfiber cloth before biometric capture.
Supported Hardware
Device Model Sensor Type UIDAI Cert
Mantra MFS100 Optical 500 DPI L0 Registered Device
Mantra MFS110 Optical 500 DPI L1 Registered Device (Hardware Encrypted)
Mantra MAPRO CX Dual Biometric L0 Registered Device
Common Mantra Error Codes
700 Capture Timeout: Finger not placed within 10 seconds.
720 Device Not Ready: Cable disconnected or sensor not initialized.
-1307 Device Communication Error: Replug USB cable or restart RD service.
1001 USB Permission: Port locked by another biometric service.
Frequently Asked Questions (FAQ)
Mantra RD Service dynamically binds to ports between 11100 and 11105 on 127.0.0.1. If port 11100 is occupied by another application, Mantra automatically switches to 11101, 11102, 11103, 11104, or 11105.
Mantra MFS100 is an optical L0 Registered Device that encrypts biometrics at software level. The newer MFS110 is an L1 Registered Device with dedicated secure hardware crypto-processors that sign and encrypt biometric templates within the sensor hardware itself, complying with UIDAI's latest L1 security mandate for banking and AEPS.
Click '1. Run Initialization & Port Scan'. Once your device is detected, click 'Serial Number'. The tool will query the device info XML endpoint and display your hardware serial number directly.
Error -1307 means communication with the scanner was interrupted. Disconnect the USB cable, wait 5 seconds, reconnect directly to a motherboard USB port (avoid USB hubs), restart the Mantra RD Service in services.msc, and run Initialization again.

Reviews (1)

Bablu Soren

Tested my Mantra MFS100 on Windows 11 for PM-Kisan eKYC. Captured biometric score of 78% on first touch. Clean, fast, and does not require third-party test apps.

Write a Review

Rating (optional)
All reviews are moderated before publishing 0 / 1000